A quelle adresse doit-on t'envoyer notre ebook sur la PRISE DE MUSCLE ?

Développé couché partiel pour les pectoraux...

Questions précises et discussions sur l'entraînement de musculation

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 14h31

Peut-être sur une rubrique dans le forum, je sais pas, mais vous imaginez ce qui s'est passé quand j'ai taper "Dc" avec la fonction recherche.
Mon interrogation est la suivante: au dc, le pectoral travaille surtout au début du mouvement (quand la barre est au plus bas), lorsqu'il ramene le bras devant (s'entend, au niveau du torse, alors qu'en position basse du dc, il se trouve en arrière de celui-ci), et en dedans.
Lorsqu'il a fourni la majeure partie de ses possibilités, et que je l'imagine à bout de course (je peux me tromper!?) le triceps prends fort le relais.

Donc! :arrow: serait il bien plus interessant de ne pas pousser la barre jusqu'a avoir les bras tendus, mais bien jusqu'a une certaine extension du bras, en dessous de l'amplitude max? (a determiner) et ce, pour insister un maximum sur les pecs, et eviter que le facteur limitatif soit le triceps?

J'espere m'etre bien fait comprendre :confused:
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4


Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h33

rien compris....

tu te demandes s'il faut verouiller les coudes arrivé en bout de course c'est ça?
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 14h35

Nop, je me demande si, dans le but d'éviter le facteur limitatif des triceps, et d'avoir un meilleur travail des pecs, il ne vaudrait pas mieux arreter l'extension des bras avant l'extension complete (=bras tendus)

Edit: enfin, oui, c'est ca la question^^
Dernière édition par Invité le 04/06/2004 14h43, édité 1 fois.
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Rudy le 04/06/2004 14h37

oui ce serait preferable mais ca oblige a bien reduire les charges aussi !
Avatar de l’utilisateur
Rudy
 
Messages: 29777
Inscription: 16/05/2003 07h20
Réputation: 284

Développé couché partiel pour les pectoraux...

Messagepar Vincent L. le 04/06/2004 14h38

hmmm dans ce cas, peut etre travailler en statique... ? ( désolé si je dis une bétise :p)
Vincent L.
 
Messages: 727
Inscription: 26/05/2004 09h19
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h38

si t'as les bras tendu, t'as une plus grande descende (et montée) à faire donc un effort plus important à fournir... c'est plus interessant... sinon t'as une micro amplitude avec les bras flechis... :wtf:
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Rudy le 04/06/2004 14h40

ca depend ce que tu veux travailler !
si tu veux faire que les pecs ca sert a rien de remonter a fond puisque c est le bas du mouvement qui les fais !
Avatar de l’utilisateur
Rudy
 
Messages: 29777
Inscription: 16/05/2003 07h20
Réputation: 284

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 14h42

Voila!
c'est ca que je voulais savoir, mon intuition serait donc la bonne, merci body!
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h43

c'est du demi DC que tu vas faire alors? :wtf:
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Rudy le 04/06/2004 14h45

c est du DC pour les pecs qu il va faire ! :D
Avatar de l’utilisateur
Rudy
 
Messages: 29777
Inscription: 16/05/2003 07h20
Réputation: 284

Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h45

le DC c'est forcement pour les pecs :p
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 14h46

Bah, demi, 1/4, 1/8, qu'importe! La question portait juste sur le type de travail a effectuer pour faire avant tout bosser les pecs.
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h47

tes pecs bosseront FORCEMENT au DC si tu executes correctement le mouvement.... mais tu les sentiras pas forcement, surtout si tu arrives à l'echec des tri, mais t'inquiete ça bosse quand meme !
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Vincent L. le 04/06/2004 14h48

surtout si tu arrives à l'echec des tri


je crois que c'est justement ça... chercher une méthode pour travailler les pecs sans arriver à l'echec des tris, car le but n'est pas de bosser les tris ^^
Vincent L.
 
Messages: 727
Inscription: 26/05/2004 09h19
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Cloporte le 04/06/2004 14h50

:arrow: isolation des pecs avec un peu d'ecarté couché avant...
de toute façon en série courte, lourde et avec 10 min de recup' tu peux pas connaitre l'echec des tri
Avatar de l’utilisateur
Cloporte
 
Messages: 1822
Inscription: 07/03/2004 20h40
Réputation: 5

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 14h55

Vincent Lopez a écrit:
surtout si tu arrives à l'echec des tri


je crois que c'est justement ça... chercher une méthode pour travailler les pecs sans arriver à l'echec des tris, car le but n'est pas de bosser les tris ^^


T'as tout piger!
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Dav91 le 04/06/2004 16h17

ca doit mieux bosser les pecs car ont doit pouvoir prendre + lourd au dc partiel je suppose!

quelqu'un a deja essayer cette methode? si oui benefique aux niveau des pecs?ou non?
car en theorie ca a l'air bien mais en pratique c'est peut etre autre chose!
Avatar de l’utilisateur
Dav91
 
Messages: 323
Inscription: 05/07/2003 11h08
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Dav91 le 04/06/2004 16h18

ca doit mieux bosser les pecs car ont doit pouvoir prendre + lourd au dc partiel je suppose!

quelqu'un a deja essayer cette methode? si oui benefique aux niveau des pecs?ou non?
car en theorie ca a l'air bien mais en pratique c'est peut etre autre chose!
Avatar de l’utilisateur
Dav91
 
Messages: 323
Inscription: 05/07/2003 11h08
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Seb33 le 04/06/2004 18h46

d'un autre coté, en faisant par ex du 1/2 Dc sur la phase base, tu as les pecs etirés, dons moin sde ponts actines/myosines, donc moins de force, donc moins de charge, donc moins de fibres en fonction, donc moins d'hypertrophie.

fais ton DC normalement (de toute manière, il est interdit de tendre les bras sauf à vouloir se foutre ls coudes en l'air) et fait derrière (après tes series ou en superset) un exo d'isolation pour finir le pec.
Seb33
 

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 18h57

bah je tend toujours mes bras, mais je bloque pas mes articulations, dans le sens que je reste jamais en haut!
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Seb33 le 04/06/2004 19h11

les bras ne doivent jamais etre bloqués (je parle pas de temps d'atente, mais de verouillage de l'articulation), sinon tu ecrases le coude et vue la fragilité de cette region...
Seb33
 

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 19h21

J'avais compris la raison ;)
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Prodij le 04/06/2004 20h46

Peter a écrit:Nop, je me demande si, dans le but d'éviter le facteur limitatif des triceps, et d'avoir un meilleur travail des pecs, il ne vaudrait pas mieux arreter l'extension des bras avant l'extension complete (=bras tendus)

Edit: enfin, oui, c'est ca la question^^


J'ai déja essayer ca une scéance et j'ai eu les épaules mortes pendant au moins 2 semaines
ProdiJ
Avatar de l’utilisateur
Prodij
 
Messages: 466
Inscription: 25/06/2003 18h43
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Invité le 04/06/2004 20h47

Bon ben iidéeee suivante :D
Invité
 
Messages: 11285
Inscription: 11/10/2007 11h27
Réputation: 4

Développé couché partiel pour les pectoraux...

Messagepar Prodij le 04/06/2004 21h54

Voivi un article qui parle de variante pour le bench:

BENCH PRESS VARIANTS
by Doug Daniels




Without question, the bench press is the most popular of weight exercises. No matter what your weight training goals are, bodybuilding or powerlifting, hard work on the bench can add size and strength to the pectorals, shoulders, and triceps like no exercise or combination of exercises known. Many lifters do not stop there and add other exercises like inclines, declines and dips to get maximal development and strength. What is overlooked by many is there are several variants of the good old bench press that are more convenient, cost effective and at least as productive. By properly integrating these variants into your routine, you can get better results without the need for any more equipment than a normal flat bench used for the regular bench press. These variants are the result of merely changing your grip width on the bar, elbow position, bar path, or range of movement.



The first way to vary your bench is to alter your grip width on the bar. By varying your grip width, you can emphasize different upper body muscle groups for specific goals. The most commonly used bench grip is slightly wider than shoulder width. This tends to emphasize the pecs, delts and triceps equally. By widening your grip, you shift more emphasis to the pecs and away from the triceps. I suggest only widening your grip one-inch on each side every 2-3 weeks, letting your flexibility and muscles and tendons become accustomed to this wider grip. Going too wide too quickly could result in injury, increase gradually. You may notice some new soreness in the pecs the first few workouts. This is due to the new stress placed upon them. You may also notice you have to use a little less weight at first. You may not possess enough pectoral strength to use the same weights with a wider grip. Give it time and you may soon surpass your old narrower grip poundage. By adding more involvement from the larger and potentially stronger pectorals, you now are using more available muscle power to bench than relying on the smaller triceps to carry the load. Most top powerlifters use wider grips to make use of their pec power.



On the other side of the coin, narrowing your grip will emphasize your triceps and lessen contribution from the pecs. However, I've seen many lifters using too narrow of a grip to work their triceps. Some go as far as being narrow enough to touch their hands together in the middle of the bar. This is a lose/lose situation, as an economist would say. First, going narrower than shoulder width grip does not work the triceps any more than shoulder width. Second, this narrow of a grip is extremely uncomfortable on the wrists and shoulders. Third, the lifter has little control of the bar and can lose control of it at any time, again risking injury. A shoulder width grip is a win/win situation that allows the lifter maximum tricep stimulus, greater comfort and safety. Lastly, more weight can be used for greater results. If I've just described your close grip bench press style, try mine and grow!



Bar path can also be varied to provide a twist to the bench. By bar path I mean where the bar hits the chest. During a regular bench, the bar would hit the chest near the nipple area. This is the position of best leverage and power. By varying where the bar hits the chest, different parts of the pectorals can be stressed. To work the upper pec, many lifters turn to the incline bench press. Though this can be an effective choice, similar results can be had by lowering the bar higher on the chest, near the shoulders, during a regular bench press. As with grip changes, don't go too high or heavy too quickly. Work into the weight gradually. Again, there may be some initial soreness due to the new stimulus on the pecs. Don't go too high on the chest. Some lifters lower the bar to the neck, which, of course, could be precarious, if the lifter fails to press the bar up to lockout. You should always use a spotter while benching anyway. Logic would assume that lowering the bar lower on the chest, more towards the waist would impact the lower pecs, like declines. Logic is correct.



Elbow position is the third method of varying the bench. Keeping your elbows out at right angles from the body (consult grade school geometry) will shift more load to the pec, similar to dumbbell flies, but a lot more weight can be used. Keeping your elbows in shifts the load away from the pecs and more to the delts and triceps.



The final variation of the bench is limiting the range or movement to less than a full up and down press. Pressing from the chest to 1/2 to 2/3 of the way up maintains tension on the pecs and builds power off the chest. Pressing from 1/2 to 2/3 of the way down to lockout switches the stage to the triceps. The third variant is pressing in the middle of the movement that spreads the load equally to all the muscle groups involved while providing continuous tension.



I'm sure many of you can now see that by combining a few of these variants together, you can design a bench workout that can fit whatever needs you have. For example, a powerlifter or bodybuilder who needed more pec work could include wide grip benches with elbows out. For a pump set, he could do partials from the bottom using the same grip and elbow position. For variety, some sets could be performed high or low on the chest as he feels fit. A lifter needing tricep power would add close grip benches with a finisher of part way down close grips, both with elbows in, of course.



The standard bench press is still your best bet for overall upper body size and strength. By merely varying your grip width, bar path, elbow position or range of movement, the simple bench press can be tailored to fit your individual needs whether you are a bodybuilder, powerlifter or average weight trainer. These bench variants can easily be integrated into your routine and require no additional equipment or space. Give some of these variants a try and I'm sure you'll receive positive results.
ProdiJ
Avatar de l’utilisateur
Prodij
 
Messages: 466
Inscription: 25/06/2003 18h43
Réputation: 0

Développé couché partiel pour les pectoraux...

Messagepar Shinoni971 le 04/06/2004 23h14

Moi j'ai vu récemment sur planète (version guadeloupénne :cool: , donc en retard de plusieurs mois par rapport à vous) un reportage sur les grand du BBing et ils montraient particulièrement le dernier Mr Olympia de Swarzy.
J'ai donc eu droit à quelques courtes séquences vidéos de l'entraînement de Lou et ont voyait qu'il faisait son DC comme vous venez de le décrire : cad descendre la barre sur les pecs remontés la barre au maxi à environ 1/2, 1/3 de l'amplitude maximale...

Mais bon l'entraînement des "pros" n'a pas grand chose à voir avec le notre parait il .. :confused:
Séduire comme un .
Shinoni971
 
Messages: 73
Inscription: 14/12/2003 21h19
Réputation: 0


Coaching avec Rudy Coia
Musculation avec haltères
Le meilleur de SuperPhysique

Retourner vers Entraînement Musculation



 


  • DISCUSSIONS EN RELATION
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum: aucun utilisateur enregistré et 13 invités

A PROPOS DE NOUS

Fondé en 2009, SuperPhysique™ est une communauté de passionnés de musculation 100% naturel (sans dopage).

SuperPhysique est dédié aux femmes et aux hommes qui travaillent dur, sans tricher, pour atteindre l'excellence physique.

Nos valeurs sont la progression, la performance, la persévérance et l'effort.

NOS VALEURS

 
© 2009-2024 SuperPhysique™